TAPER BUSHESMetric Bores/ Inch Bores

Using Taper Bushes it is possible to achieve "shrink fit" of pulleys, couplings, etc, onto shafts quickly and safely.


WELD-ON HUBS
Weld-On Hubs are made of steel, drilled, tapped and taper bored to receive Tapered Bushings. They are very useful for welding into fan rotors, pulleys, plate sprockets, impellers, agitators and many other devices, which must be firmly fastened to the shaft. Types W, WM, WH are available.

BOLT-ON HUBS & TAPER ADAPTERS
SM & BF Bolt-On Hubs are designed for use with the Taper Bushings. They provide a convenient means of securing fan rotors, impellers, agitators and other devices that must be fastened firmly to shafts.

AM & BM Type Adaptors for Taper Bushes are available for use in parallel bored components, thereby eliminating the need to drill, tap and taper-bore.

QD Bush also available

Catalog of Taper Bushes

 
1008,1108,1210,1215,1310,1610,1615,2010,2017,2517,2525, 3020,3030,3535,4040,4545,5050
6050,7060,8065,10085,120100
 

KeyWay Size of above Bushes (in Inches)
KeyWay Size of Above Bushes ( in MM)
 

Catalog of Taper Bore adapters
 

Catalog of Taper Bore Bolt on Hubs

 

Catalog of Taper Bore Weld on Hubs(F Type and S Type)
 

Catalog of Taper Bore Weld on Hubs(W Type and WH Type)

 

Catalog of Taper Bore Weld on Hubs(K Type and W/WA Type)
  

Catalog of QD Bushes
Catalog of QD Hubs

 

Catalog of Disassembling hubs for platewheels
 

Catalog of XT Bushes
Catalog of XT hubs

 

Catalog of Split Taper Bushes
Hubs for Split Taper Bushes
Spline Bushes

Back

Copyright  2003  EPT All rights reserved.